The BMW 3 Series is a popular luxury car that requires regular maintenance to keep it in good condition. One aspect of this maintenance is resetting the service light, which alerts you when it’s time for an oil change or other routine service. If you’re unsure how to reset the service light on your BMW 3 Series, don’t worry – it’s a simple process that you can do yourself. Here are the steps:
- Turn on the ignition
Insert the key into the ignition and turn it to the “on” position without starting the engine. You should see various warning lights illuminate on the dashboard.
- Locate the “reset” button
Look for a button on the dashboard labeled “reset” or “reset oil service.” It may be located on the instrument cluster, the turn signal stalk, or the center console.
- Press and hold the “reset” button
With the ignition still in the “on” position, press and hold the “reset” button until the service light begins to flash. This usually takes about 5-10 seconds.
- Release the button
Once the service light starts to flash, release the “reset” button.
- Turn off the ignition
Turn the key to the “off” position and remove it from the ignition.
- Wait a few seconds
Wait about 10 seconds to ensure that the service light has been reset.
- Turn on the ignition again
Insert the key into the ignition and turn it to the “on” position. The service light should no longer be illuminated.
That’s it! By following these simple steps, you can reset the service light on your BMW 3 Series and keep track of your vehicle’s maintenance needs. It’s important to note that the exact steps may vary slightly depending on the year and model of your BMW, so consult your owner’s manual for specific instructions if needed.
Discussion about this post